Overview The items which may be checked or set in the service mode are described below. This will display the 2 MENU screen. Storage and handling when the packing seal has been opened Then perform the mirror positioning adjustment described on the next page. If any of the conditions listed below exist, then the ESS mode is not activated. If toner gets onto skin or clothes, wipe off as thoroughly as possible with a dry tissue, then wash.
|Date Added:||17 November 2007|
|File Size:||30.70 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This switch is only compatible with V machines. When copying 2 sheets of A4 size paper. Is the trouble resolved when the fixFixing assem3 ing assembly is replaced? The test mode items are divided into 8 blocks. The function of the jumper plug JP1 is to help prevent the consumption gp16 the batteries.
If paper is fed which is different in width from the paper size set by g1p60 cassette paper size lever, the feeding operation will stop. When transmission modes are selected by these switches, international transmission mode can also be set using transmission via the numeric key pad. CCD in the service mode.
Drivers for manufacturers Canon to Printers
The paper in the tray is lifted up by the lifter plate and pressed down by the multi feeder pick-up roller. AC bias pdl well as DC bias is applied to the primary charging roller in order to stabilize the charging.
The room should have good ventilation. Overview The primary locations where paper jams occur in this machine are as shown below.
Removing the pick-up unit 1 Remove the cassette feeder from the csnon unit. At this time, the cogless part of the feeding roller drive gear is in the drive relay gear position, and the 2 gears are not engaged, therefore power is not transmitted to the pick-up drive axis gear. No paper in one location: The data this battery protects are the image data from transmitting and receiving faxes.
Canon GP160 PCL 5e Drivers for Windows 8 64 bit Download
When copying books, etc. Version number, checksum, etc. Push Paper lifting plate 3 Turn the front paper width guide knob to remove the lock, move the guide to match the desired paper width, and turn the knob again to lock it. NO Check if the spring that Does the lifting plate rise with the lifts the lifting plate is pick-up timing? Confirm the copy image is correct.
When condensation occurs, wipe the parts dry and leave the machine supplied with power for 60 minutes. NO Reconnect the connector properly. Is slipping or fracturing occurring 4 YES Replace the gear. CCD unit 1 Remove the 2 installation screws, remove the copyboard glass stay, and then take out the copyboard glass.
See more details about this product. If the fax mode is already activated, this step may be skipped. NO Reset the paper.
Gently move mirror1 mount manual2 NO Clean the scanner rail ly. Scanner does not move forward Cause Scanner drive wire Foreign object in the scanner drive path Steps Checks Is the scanner drive wire properly 1 attached? CS SET mirror mount initialization setting When this item is set, the mirror mount moves to the position set gp610 shipped.
The lithium battery and the vanadium lithium secondary battery are hp160 up of lithium and organic solvents, which are extremely combustible materials. The operating conditions for the copy mode and memory copy mode are described below. Do not place in direct sunlight. The following label indicates that the product has been approved by the CDRH regulations. Start signal Delivery sensor PS Delivery sensor jam check 1. When replacing the image processor PCB, check the counter before replacing.